| da - Cone Frontface Backing Diameter | 1.89 in |
| C0 - Static Radial Rating | 18700 lbf |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)7 | 2570 lbf |
| C1 - Dynamic Radial Rating (1 million revolutions)6 | 21200 lbf |
| B - Cone Width | 0.8820 in |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 | 36900 lbf |
| d | 1.6929 in |
| C90 - Dynamic Radial Rating (90 million revolutions)5 | 5490 lbf |
| Ab - Cage-Cone Frontface Clearance | 0.07 in |
| Design Units | Imperial |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 | 9560 lbf |
| G2 - Heat Generation Factor (Rib-Roller End) | 13 |
| G1 - Heat Generation Factor (Roller-Raceway) | 26.5 |
| Cage Type | Stamped Steel |
| Aa - Cage-Cone Backface Clearance | 0 in |
| Cg - Geometry Factor | 0.0676 |
| db - Cone Backface Backing Diameter | 2.17 in |
| R - Cone Backface To Clear Radius3 | 0.14 in |
| a - Effective Center Location4 | -0.24 in |
| K - Factor8 | 2.14 |
| 9HR3065T[F(AP-C),F(AP-CF),F(AP-HC)]+[175-3000/1]L[H,P,SP,UP][F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR | d:130 mm; D:200 mm; Axial Load Factor Y2:3.72; ra (max):2 mm; Roller Profile:Asymmetric; Radial Clearance:0.120 to 0.160 mm; Da (max):190 mm; B:52 mm; Enclosure:Open; Limiting Speed - Oil:4,050 rpm; Hole Diameter (do):5 mm; Static Load Rating:664,000 N; Configuration:Double Row; Weight:6.100 kg; Nr. |
| 7SRS7M[SS,UU]+[25-480/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | Y - ISO Factor4:1.39; e - ISO Factor3:0.43; Series:32252; G2 - Heat Generation Factor (Rib-Roller End):141.7; G1 - Heat Generation Factor (Roller-Raceway):2419.2; K - Factor2:1.36; C - Cup Width:106 mm; D:480 mm; Cg - Geometry Factor:0.1902; Cup Part Number:Y32252; Design Units:METRIC; r - Cup Backf |
| 9HR3065T[F(AP-C),F(AP-CF),F(AP-HC)]+[175-3000/1]L THK Separated Linear Guide Side Rails Set Model HR | Dimension H:2.1 in; Ca - Axial Load Rating:5799.99 lbf; Dimension N:17.2 in; Bearing Type:Split Cylindrical Re; Cr - Dynamic Load Rating:94869 lbf; Tensioning Unit Type:Tension Type; Shaft Size:5-7/16 in; Bearing UPC:013992027221; Seal Type:High Temperature Pac; Dimension X:1.7 in; Dimension D:15.7 |
| 9HR3065T[F(AP-C),F(AP-CF),F(AP-HC)]+[175-3000/1]L[H,P,SP,UP] THK Separated Linear Guide Side Rails Set Model HR | Size (mm):750x1090x150; Outer Diameter (mm):1090; C:150 mm; Basic dynamic load rating (C):1050 kN; D:1090 mm; Width (mm):150; d:750 mm; (Grease) Lubrication Speed:435 r/min; Bore Diameter (mm):750; B:150 mm; Basic static load rating (C0):2500 kN; Bearing number:60/750; Weight:473 Kg; |
| 7SRS7M[SS,UU]+[25-480/1]LM THK Miniature Linear Guide Caged Ball SRS Series | Designation FAG:713611560; Bearing number:VKBA 800; Designation Ruville:5419; Designation SX:CX159; Designation SNR:R154.19; |
| 9HR3065T[F(AP-C),F(AP-CF),F(AP-HC)]+[175-3000/1]L[F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR | Size (mm):22.225x28.575x9.525; Outer Diameter (mm):28,575; Bore Diameter (mm):22,225; (Grease) Lubrication Speed:7 500 r/min; Bearing number:DCL146; Basic static load rating (C0):8,3 kN; D:28,575 mm; Fw:22,225 mm; Basic dynamic load rating (C):7,15 kN; Width (mm):9,525; C:9,525 mm; Weight:0,013 Kg; |
| 7SRS7M+[25-480/1]LM THK Miniature Linear Guide Caged Ball SRS Series | Bearing number:691X-2Z; Bore Diameter (mm):1,5; Size (mm):1.5x5x2.6; Outer Diameter (mm):5; C:2,6 mm; Basic dynamic load rating (C):0,169 kN; B:2,6 mm; Width (mm):2,6; Basic static load rating (C0):0,05 kN; d:1,5 mm; D:5 mm; |
| 7SRS7M+[25-480/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | Clearance:C3; Radius Rs min:2.100 mm; Outside Diameter D:225.000 mm; C0r - Static Load Rating:124.5 kN; Cr - Dynamic Load Rating:131.7 kN; Outside Ring Width B:35.000 mm; Features:Open; Weight:4.90 Kg; Grease Reference Speed:3600 rpm; Bore Size d:150 mm; Oil Reference Speed:5200 rpm; |