5.375 Inch | 136.525 Millimeter x 0 Inch | 0 Millimeter x 1.875 Inch | 47.625 Millimeter TIMKEN 74537-3 Tapered Roller Bearings

The online 5.375 Inch | 136.525 Millimeter x 0 Inch | 0 Millimeter x 1.875 Inch | 47.625 Millimeter TIMKEN 74537-3 Tapered Roller Bearings parts 5.375 Inch | 136.525 Millimeter x 0 Inch | 0 Millimeter x 1.875 Inch | 47.625 Millimeter store gives Qingdao XMD Autos Ball Bearing Co., Ltd. you immediate access to a selection of more than 5.00 mm a 1.4 million new, used, remanufactured.

What is 74537-3 bearing cross reference?

Brand Name:TIMKEN
Model Number:74537-3
Series:95000
Cone Part Number:95524V
Design Units:Imperial
Cage Type:Stamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:292000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:75600 lbf
d:5.2500 in
B - Cone Width:2.5 in
PDF 74537-3

Product Details

Series95000
Cone Part Number95524V
Design UnitsImperial
Cage TypeStamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1292000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)275600 lbf
d5.2500 in
B - Cone Width2.5 in
R - Cone Backface To Clear Radius30.03 in
da - Cone Frontface Backing Diameter5.87 in
db - Cone Backface Backing Diameter5.87 in
Ab - Cage-Cone Frontface Clearance0.19 in
Aa - Cage-Cone Backface Clearance0.22 in
a - Effective Center Location4-0.55 in
C90 - Dynamic Radial Rating (90 million revolutions)543400 lbf
C1 - Dynamic Radial Rating (1 million revolutions)6168000 lbf
C0 - Static Radial Rating209000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)727500 lbf
K - Factor81.58
G1 - Heat Generation Factor (Roller-Raceway)453.9
G2 - Heat Generation Factor (Rib-Roller End)59.4
Cg - Geometry Factor0.132
View more

Company Profile

Worktime 9:00-18:00(Beijing time)
Phone 86-02-7515247
View more

Related News

  • 5 Common Engine Bearing Failure Symptoms – CAR FROMDec 24, 2018 — How long can you drive a car with a bad wheel bearing? Loss of oil pressure is also one of engine bearing failure symptoms you need to  How to Know When a Rod or Main...
  • Bearings - Interactive Maths Series software (interactiveIt is used to find a direction or bearing . The true bearing to a point is the angle measured in degrees in a clockwise To state the direction of a point, write: Bearings - Mathematics GCSE...
  • Electric Motor Bearing Greasing Basics - Reliabilityweb: ABearings should be lubricated at an average frequency as found in Table 2. We are limiting this paper to a standard deep-groove ball bearing without shields or When too much grease is added, the...
  • Recommended Products

    All Products Contact Now